Operations; Starting; Before Setting The Temperature; Door Alarm - LG GL 402 Series Owner's Manual

OPERATIONS /

STARTING /

When your refrigerator is firstly installed, allow 24 hours for the temperature to stabilize prior to filling it
with fresh or frozen foods.
If operation is interrupted, wait 5 minutes before restarting.

BEFORE SETTING THE TEMPERATURE /

The temperature of the refrigerator is kept constant regardless of changes in room temperature. It is
recommended that, once set, the temperature settings(the controls for the refrigerator and freezer
compartments) not be changed unless necessary.
This refrigerator has one temperature control button for the refrigerator compartment and one
temperature control dial for the freezer compartment.
The default setting of the temperature control button for the refrigerator compartment is '3°C'.
The default setting of the temperature control dial for the freezer compartment is '4' /
'3' (For Power Cut EverCool model only).
This refrigerator has a temperature sensor in the refrigerator compartment. It will start and stop the
compressor automatically as needed.

DOOR ALARM /

When the door of the refrigerator is open for 1 minute, an alarm will sound three times. If the door remains
open for more than a minute, the alarm will repeat every 30 seconds.

SELF TEST /

Your refrigerator contains a built in diagnostic capability. If it develops a malfunction in certain areas, it will
display an error code to assist the repair technician. While an error code is displayed, other control and
display functions will not operate.
If an error code is displayed, contact a service center. Do not disconnect the power cord from the outlet.
* Applicable as per model variant.
K§ Q o (
24 Evercool model
)
'4' / '3' (For Power Cut EverCool model only)
15