Polaris 2000 120 XCR Rider's Safety Manual And Owner's Operation And Maintenance Manual page 73

Hi-Fax Replacement
The 120 XCR uses
XTRA Lite style Hi-
Fax. When any
area of the Hi-Fax
is worn to 7/16"
(1.1 cm), it should
be replaced. This
will save wear on
other vital compo-
nents.
The slide rail is de-
signed to operate
in conditions with
adequate snow
cover to provide
sufficient lubrication. Excessive wear may be due to improper alignment, improper
track adjustment or machine operation on surfaces without snow. Take the ma-
chine to your dealer for Hi-fax replacement.
Track Lubrication
Track failure, loss of vehicle control and braking ability can result from extended
use of this vehicle on surfaces providing marginal lubrication between hi-fax and
track guide clips. Examples of marginal lubrication would include lakes without
snow cover, icy trails and no-snow conditions.
The slide rail is designed to operate in conditions with adequate snow cover in or-
der to provide sufficient lubrication. Excessive wear indicates insufficient lubrica-
tion. New hi-fax can cause faster heat build up in limited lubrication than used hi-
fax, resulting in excessive wear.
Track damage or failure caused by operation on ice or poor lubrication
conditions will void the track warranty.
Hi Fax Wear Limit
XTRA Lite
CAUTION
MAINTENANCE
7/16" (1.1 cm)
A--51