Advertisement
3
Connect your device
If the connection is successful, connect your device to the broadband
extender using the ethernet cable provided.
After 1 minute of inactivity on the ethernet port, the extender will go into power
save mode. The Power indicator will be flashing.
Light status
Data
Ethernet
Power
Broadband Extender
Light
Status
What's happening
Power
On
Extender running normally
Flashing
Extender resetting, synchronising or power save mode
Off
Extender turned off
Ethernet
On
Device connected to extender
Flashing
Data being sent or received
Off
No device connected to extender or device switched off
Data
On
Extender connected to network
Green: High transfer speed
Orange: Medium transfer speed
Red: Low transfer speed
Off
No connection to network
Advertisement
