Advertisement
1
Plug in extender near
your device
TIP: you might find it easier to plug your new broadband extender in the same
double power socket or near one of your existing ones whilst you set things up.
1
Plug the extender directly into a wall power socket near the device you want
to connect. Make sure the socket's switched on.
IMPORTANT: to work properly, extenders must be plugged directly into the wall
socket and not into extension leads.
2
Add to your
existing network
Press the Link button on the top for 5 to 8 seconds.
1
Wait for the device to restart. If everything is okay,
2
the Power indicator will go back to steady green.
3
Press the Link button again, this time for 1 second.
4
Within 2 minutes, press the Link or
equivalent button on any of the
existing extenders for 1 second to
complete the connection to
the network.
Wait for connection to complete.
5
Give it a couple of minutes.
If everything's okay, the Power
and Data indicators on your
new extender will light up.
See Connection help overleaf if the Data indicator doesn't
light up on the extender.
È
È
È
Advertisement
