Table of Contents
Advertisement
Section 3 - Configuration
The Wireless Settings feature will allow you to create temporary zones that can be used by guests to access the Internet.
Enable SSID:
Check to enable the Multi-SSID wireless function. If you
do not want to use SSID wireless, uncheck the box to
disable all the wireless functions.
IP Address:
Input the IP Address of the router. (The default is
192.169.0.1)
802.11 Mode:
Select one of the following:
802.11g Only - Select if all of your wireless clients are
802.11g.
802.11n Only - Select only if all of your wireless clients
are 802.11n.
Mixed 802.11n and 802.11g - Select if you are using a
mix of 802.11n and 11g wireless clients.
Enable Auto
This setting can be selected to allow the DIR-640L
Channel Scan
to choose the channel with the least amount of
(2.4GHz):
interference for the 2.4GHz band.
2.4GHz Wireless
Indicates the channel setting for the DIR-640L on the
Channel:
2.4GHz band. If you enable Auto Channel Scan, this
option will be greyed out.
2.4GHz Wireless
Select the Channel Width for the 2.4GHz band:
Channel Width:
Auto 20/40 - This is the default setting. Select if you are
using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless
clients.
40MHz - Select if using only 802.11n wireless clients.
D-Link DIR-640L User Manual
Wireless Settings
19
Advertisement
Table of Contents
