Table of Contents
Advertisement
Replacing the battery
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Slide the battery in the slot on the computer base and align the screw holes on
the battery with the screw holes on the computer base.
2
Replace the five screws (M2x4 T8) that secure the battery to the computer
base.
3
Route the battery cable through the routing guides on the computer base.
Post-requisites
Replace the
base
20
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before
Advertisement
Table of Contents
