Page 1
Kitt Shoe rack Assembly Instructions - Please keep for future reference KITT-SR-AW19-A Dimensions Width -70cm Depth -28cm Height -40.9cm Please Note If you purchased two shoe racks and want to stack them, in order to help prevent overturning these products must to used with wall devices provided to fix the top one.
Page 2
Check you have all the components and Assemble the item as close to its final tools listed on the front cover and position (in the same room) as possible. pages 3. Remove all fittings from the plastic bags and separate them into their groups. Always use place mats and coasters to Dust regularly with a clean dry cloth.
Page 3
Components If you need help or have damaged or missing parts, email: customerservices@habitat.co.uk or call: 0344 499 4686 Please check you have all the panels listed below Step1:...
Page 5
Step4: IMPORTANT! If you purchased two shoe racks and want to stack them, please fix top one to your wall. Step5 Step6:...
Page 6
Step7: Fixing the wall bracket to your wall Please Note You must source and supply suitable fixings for your wall type. If in doubt consult a qualified trades person. Always ensure that the wall to be drilled into is free from hidden electrical wires, water and gas pipes.
1: General rule: Always use a larger screw and wall plug if you are not sure. different wall types, Habitat cannot provide you with the 2: Ensure you use the recommended drill bit to match the wall exact fixings you will need to plug and hole size.