Habitat KIRBY KIRB-CH-SS20-A Assembly Instructions

Oak veneer chair coloured leg

Download this manual

KIRBY. OAK VENEER CHAIR COLOURED LEG

Assembly Instructions - Please keep for future reference

Please assemble on a flat surface.

Assembly to be carried out by a competent adult only.

During assembly children should be kept away from the product due to risk of injury.

Do not use this item if any of the components are missing or damaged.

Important – Please read these instructions before assembly

If you need help or have damaged or missing parts, email:

customerservices@habitat.co.uk

0344 499 4686

or call:

KIRB-CH-SS20-A

Dimensions

Length - 40.5cm

Wigth - 52cm

Height - 86cm

Tools required

Page 1 Tools required Do not use this item if any of the components are missing or damaged. Important – Please read these instructions before assembly If you need help or have damaged or missing parts, email: customerservices@habitat.co.uk 0344 499 4686 or call:...
Page 2 Please retain your receipt as proof of received, please contact the store or problems with your Habitat product, purchase. Habitat Head Ofﬁce via its web site: please contact the store from which www.habitat.co.uk If you have any comments or you purchased it.
Page 3 Components - Panels If you need help or have damaged or missing parts, email: customerservices@habitat.co.uk or call: 0344 499 4686 Please check you have all the panels listed below Note: There are ‘Batch Code’ labels where shown on the indicated items, these should be retained.
Page 4 Assembly Instructions Step 1 1 PC 1/4”x15mm 1 PC 1/4” 1 PC Step 2 5/8” 4PCS Front of Chair Seat...
Page 5 Assembly Instructions Step 3 4PCS 1/4”x28mm F x4 4PCS 1/4” I x1 1 PC Step 4 4PCS 5/8” Please ensure that you have followed the assembly instructions carefully and that all ttings are secured before using these chairs.