Environmental Protection; Packaging/Old Appliance; Energy-Saving Tips; Installation And Connection - Bosch WTG86261EE Installation And Operating Instructions Manual

Table of Contents

Advertisement

Environmental protection

en
7
Environmental
protection

Packaging/old appliance

E n v i r o n m e n t a l p r o t e c t i o n
Dispose of packaging in an
)
environmentally-responsible
manner.
This appliance is labelled in
accordance with European
Directive 2012/19/EU
concerning used electrical and
electronic appliances (waste
electrical and electronic
equipment - WEEE).
The guideline determines the
framework for the return and
recycling of used appliances
as applicable throughout the
EU.

Energy-saving tips

Spin the laundry before drying.
The drier the laundry, the shorter
the drying time will be, thus
consuming less energy.
Load the dryer with the maximum
load.
Do not exceed the maximum
Note:
load for the programs, as this
prolongs the drying time
and increases energy consumption.
Ventilate the room and keep the air
inlet on the dryer free to ensure air
exchange.
Clean the fluff filter after each drying
cycle. If the fluff filter is dirty,
the drying time is prolonged
and energy consumption is
increased.
12
Energy saving mode: If the dryer is
not operated for a prolonged period,
it automatically switches off before
the program starts and when
the program has ended to save
energy. The display panel
and indicator lamps go off after
a few minutes and the Start button
flashes. To activate the lighting,
press any button, open or close
the dryer door or turn the program
selector.
5
Installation and
connection

Scope of delivery

I n s t a l l a t i o n a n d c o n n e c t i o n
Dryer
Installation and operating
instructions
Basket for woollens
Condensation drain*
Installing and connecting the
dryer
:
Warning
Risk of death!
There is a risk of electric shock as the
dryer is operated with electricity.
Check the dryer for visible damage.
You must not operate the dryer if it is
damaged.
Before connecting the dryer to the
power supply, ensure that the
electric voltage specified on the
rating plate matches the voltage of
your socket.
Only use residual current circuit
breakers with the following symbol:
z.
*
Depending on the model
*

Advertisement

Table of Contents
loading

Table of Contents