NETGEAR WN121T User Manual page 37

Next 300 mbps wireless usb 2.0 adapter

Hide thumbs Also See for WN121T:

Table of Contents

NETGEAR Next 300 Mbps Wireless USB 2.0 Adapter WN121T User Manual

b. Use the

icon to open the Smart Wizard. The Settings tab page opens.

Figure 2-8

3. Configure the Security settings.

a. In the Profile box, select the profile or type in a profile name.

b. In the Network Name (SSID) field select the network, or enter the SSID.

Note: You will not get a wireless network connection unless the network SSID

c. In the Security section, select WPA2-PSK [AES].

For more information about WPA2-PSK security, see the Web link to

Communications:" in Appendix

4. Save your settings in a Profile.

a. Click the Save Profile button. All the configuration settings are saved in this profile.

b. Click Apply.

c. Click Close to exit the Smart Wizard.

matches exactly what is configured in the access point.

v1.0, August 2006

"Wireless

2-13

Table of Contents