NETGEAR Next 300 Mbps Wireless USB 2.0 Adapter WN121T User Manual
1. Use the
icon to open the Smart Wizard. The Settings page opens.
2. Enter the network settings.
a. Select Computer-to-
Computer (Ad Hoc) for
the Network Type.
b. Select or enter the
Network Name (SSID)
for the Ad Hoc network.
c. In the Profile box, type
the name of the profile.
d. Click Apply.
5. Save your settings in a Profile.
a. Click Save Profile.
All the configuration settings are saved in this profile.
b. Click Apply.
c. Click Close to exit the Smart Wizard, or Cancel to return to the previous settings.
4. Configure the PC network settings.
a. Configure each PC with either a static IP address or with the IPX protocol.
b. Restart the PCs.
3. Verify wireless connectivity between your peer devices.
2-6
Figure 2-3
v1.0, August 2006