NETGEAR RangeMax 240 Wireless MIMO USB 2.0 Adapter WPNT121 WPNT121 WPNT121 Installation Manual

Wireless USB 2.0 Adapter Model WPNT121
These setup instructions assume that you will connect to an access point or wireless router.
Estimated Completion 10 minutes.

Start Here

Note: The adapter is compatible with Windows XP S2 and Windows 2000 SP4 operating
systems. Windows XP SP1 users must upgrade with a Microsoft Hot Fix KB822603 first.
1. First, install the software.
a. Insert the NETGEAR CD in your
computer's CD drive. If the main page
does not appear, double click
autorun.exe on the CD.
b. Click the Install Software link and
the Smart Wizard starts.
c. Follow the Wizard steps, and click
Next to continue.
d. When the Installation Complete
message appears, click Next.
2. Now, connect the Wireless USB 2.0 Adapter.
a. Locate an available USB port on your
computer.
b. Insert the end of the cable on the
Wireless USB 2.0 Adapter into the
USB port.
c. The Found New Hardware Wizard
opens. Follow the wizard prompts.
3. For Windows XP users, choose the wizard.
Note: If you use Windows 2000 SP4, skip to Step 4, below.
a. Choose the NETGEAR Smart Wizard
(recommended) or the Windows XP
Configuration utility.
Note: If you choose the Windows XP
option, then you must read the Windows
XP documentation for instructions.
b. Click Next to accept the NETGEAR
Smart Wizard.
4. Use the Smart Wizard to set up
your Wireless USB 2.0 Adapter
a. When prompted, click Next to let the
wizard help you connect to a network
(recommended).
b. Select the wireless network from the
drop-down list, and the wizard records
your choice.
Note: Hidden networks do not broadcast
the Network Name (SSID). These
networks are included in the drop-down
list, but the Network Name (SSID) is
blank.
If the network uses security, then the
Smart Wizard detects it.
c. Follow the Wizard steps for Security (if used) and for saving a Profile.
d. After you have reviewed the settings, click Finish.
The icon appears in the system tray and on the desktop; and the Settings page opens.
The wizard initiates your wireless connection. It could take up to a minute for your
wireless connection to be established. The status bar shows the status of your wireless
connection.
Using the Status Bar
The status bar is located at the bottom of the Settings page.
connection Internet/router
status connection indicator
• Connection Status: The color shows the connection status.
• Signal Strength: Shows the signal strength of the wireless network. If the signal is
poor, try moving closer to the wireless access point.
• Lock icon: Shows if security is used on the network.
• Internet/Router connection: Shows the progress of your connection.
Connection
Indicator
Connected to Internet
Connected to Router
Hidden Network
___.___.___.___ or
169.254..x.x
unlocked: network signal strength
does not use security indicator
Description
Wireless Internet connection OK.
Wireless connection to router OK but no Internet connection
at router.
Wireless connection to a router OK but problem with the
router. See the online help or the User Manual for trouble-
shooting tips.