Table of Contents
Advertisement
Step 3: Remove the base and stand from the display, see "Removing the Display Base and Support Arm" on
pages 2-9.
Step 4: Install the assembly bracket for the VESA compatible wall mount. (100mm x 100mm distance),
VESA assembly screws M4 x 10 mm.
VESA hole
Step 5: Mount the LCD to the wall following the instructions for the wall mount. Only the lightest
weight/weight-bearing wall mount from the UL list should be used: 8kg
Note: When using the flexible arm, the display should not be tilted downward by more than 5 degrees.
Chapter 2. Adjusting and Using the Display 2-10
Advertisement
Table of Contents
