Table of Contents
Advertisement
Use the On-Screen Display (OSD) Control
When adjusting the settings, you can view the user controls through the OSD.
Use controls:
1. Press
to open the OSD Main Menu.
2. Use ∧ or ∨ to move between icons. Select an icon and press
submenu, use ∧ or ∧ to move between options, and then press
make adjustments, and then press
3. Press
to exit the submenu in sequence, and then exit the OSD.
4. When OSD is not displayed, press
prevent accidental adjustment of the OSD. Press
adjustment.
5. DDC/CI is enabled by default. Press
function. The message "DDC/CI disable (DDC/CI enable)" is displayed on the screen.
to save.
and hold for 10 seconds to lock the OSD. In this way, you can
and hold for 10 seconds to unlock the OSD for OSD
and hold for 10 seconds to disable/enable the DDC/CI
to access the feature. If there is a
to select the feature. Use ∧ or ∨ to
Chapter 2. Adjusting and Using the Display 2-4
Advertisement
Table of Contents
