Table of Contents
Advertisement
6. Plug the power cord into the display, and then plug the display power cord and computer cord into a
grounded power outlet.
Note: A certified power cord must be used for this equipment. The installation and/o r equipment regulations
of the country concerned should be taken into account. The certified power cable used should not be lighter
than the normal PVC cable (marked H05VV-F 3G 0.75mm2 or H05VVH2-F2 3G 0.75mm2) as specified in
IEC 60227. In addition, synthetic rubber cords as specified in IEC 60245 (marked H05RR-F 3G 0.75mm2)
should be used.
7. Use cable clamps when connecting cables
Chapter 1. New Member Guide 1-6
Advertisement
Table of Contents
