Toro Workman 07369 Operator's Manual page 30

Maintenance Service
Interval
Before each use or daily
Every 50 hours
Every 100 hours
Every 200 hours
Every 400 hours
Every 600 hours
Every 800 hours
Every 1,000 hours
Maintenance Procedure
• Inspect the seat belt(s) for wear, cuts, and other damage. Replace the seat belt(s) if
any component does not operate properly.
• Check the tire pressure.
• Check the operation of the safety-interlock system.
• Check engine oil level.
• Check the brake-fluid level. Check the brake-fluid level before you first start the
engine.
• Check the transaxle/hydraulic-fluid level. (Check the fluid level before the engine
is first started and every 8 hours or daily, thereafter.)
• Wash the machine.
• Clean and oil the air cleaner foam pre-cleaner (every 25 hours if operating conditions
are extremely dusty or sandy).
• Inspect the air cleaner paper element.
• Check the battery-fluid level (every 30 days if in storage).
• Check the battery cable connections.
• Grease the bearings and bushings (lubricate more frequently in heavy-duty
applications).
• Change the air cleaner paper element.
• Change the engine oil and filter.
• Check the spark plugs.
• Inspect the opening on the carbon canister air filter.
• Inspect the condition of the tires.
• Clean the engine-cooling areas.
• Change the carbon canister air filter.
• Check the adjustment of the shift cables.
• Check the adjustment of the high-low cable.
• Check the adjustment of the differential-lock cable.
• Torque the front and rear wheel lug nuts.
• Check the adjustment of the parking brake.
• Check the adjustment of the brake pedal.
• Check the condition and tension of the pump-drive belt.
• Check the adjustment of the clutch pedal.
• Check the adjustment of the accelerator.
• Inspect the service and parking brakes.
• Inspect the fuel lines and connections.
• Replace the fuel filter.
• Check the front wheel alignment.
• Visually inspect the brakes for worn brake shoes.
• Adjust the engine-valve clearance.
• Change the hydraulic fluid and clean the strainer.
• Replace the hydraulic filter.
• Change the brake fluid.
30