Replacing The Display Assembly; Procedure; Post-Requisites - Dell Inspiron 24 3452 Service Manual

Replacing the display assembly

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Procedure

1 Slide the display cable through the slot on the display-assembly base.
2 Slide the tabs on the display bezel into the slots on the display-assembly
base.
3 Replace the display-assembly base on the display bezel.
4 Replace the screws that secure the display-assembly base to the display
bezel.
5 Route the optical drive and hard drive cables through the routing guides
on the display-assembly base.

Post-requisites

1 Replace the
2 Replace the speakers.
3 Replace the
4 Replace the
5 Replace the
6 Replace the camera.
7 Replace the microphone.
8 Replace the fan.
9 Replace the
10 Replace the
11 Replace the
12 Replace the
13 Replace the
14 Replace the
72
control-buttons
speaker cover.
VESA-mount bracket.
system board.
heat sink.
wireless card.
memory module.
hard drive.
optical drive.
back cover.
computer. After working inside your
After working inside your
board.