Table of Contents
Advertisement
Chapter 4
•
Stateless DHCPv6:
Autoconfiguration" and "Dynamic Host Configuration Protocol for IPv6" and is
specified by RFC3736. Select the checkbox to enable this function.
4. Click
Save
to make the settings effective. Now IPv6 service is available for your
network.
4 2
Test Internet Connectivity
After manually setting up an internet connection, you need to test the internet
connectivity. The modem router provides two diagnostic tools to help you locate the
malfunction.
1. Visit http://tplinkmodem.net, and log in with the password you set for the router.
2. Go to
Advanced
3. Select
Ping
or
Traceroute
to your needs.
•
Ping
is used to test the connectivity between the router and the tested host,
and measure the round-trip time.
Target IP/Domain Name:
ping.
Ping Packet Size:
Ping Count:
Ping Interval:
Stateless DHCPv6 is a combination of "stateless Address
>
System Tools
> Diagnostics.
as the diagnostic tool and enter the parameter according
Enter the IP address/domain name that you want to
Enter the size of the ping packet you want to use.
Enter the number of times you want to ping the target device.
Enter the time period between each ping.
Configure Internet Connections
14
Advertisement
Table of Contents
