Tv Channel Setting (Advanced) - Sharp 56FW-53H Operation Manual

Sharp 56fw-53h: operation manual
Hide thumbs Also See for 56FW-53H:
Table of Contents

Advertisement

TV Channel Setting (Advanced)

To repeat the AUTO INSTALLATION
In this mode you can to do again the AUTO INSTALLATION
(e.g.: after home changing).
Press the MENU button G to see the MAIN Menu.
1.
2.
Press the BLUE button
3.
Press the RED button
4.
Press the RED button again
INSTALLATION.
5.
The AUTO INSTALLATION message will appear on your TV
screen.
Press the MENU button G to stop the AUTO INSTALLATION or
6.
press any other button and follow the instructions on the screen, to
start Auto Channel Preset.
Automatic Channel Sorting System (ASS): The TV set SEARCHES
FOR FREQUENCIES, memorises the channels found, and sorts them
(according to technical criteria) from Pr-01 of the TV, to a maximum of
99 programmes.
Note: This tuning process may take several minutes to perform.
When the AUTOMATIC SEARCH has been completed, the "Stored
programmes " menu will appear on screen and you can change the
order of the channels and change or give the channels a four letter
name.
If you wish to rename the channels, or change the order; refer to the
chapter -Stored programmes- (page 8).
If you wish to go out of the menu, press the BLUE button.
to see the TUNE Menu.
to see the INSTALLATION Menu.
to start the AUTO
28
MAIN Menu
TUNE Menu
INSTALLATION Menu
Automatic searching and sorting.
Press the menu button to cancel.

Advertisement

Table of Contents
loading

Table of Contents