Bosch Professional 18V-32 Original Instructions Manual page 14

14 | English
not touch any objects or the floor with the saw while it
is running. There is a risk of kickback.
Use suitable detectors to determine if there are hid-
u
den supply lines or contact the local utility company
for assistance. Contact with electric cables can cause
fire and electric shock. Damaging gas lines can lead to ex-
plosion. Breaking water pipes causes property damage.
In case of damage and improper use of the battery, va-
u
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is suitable for sawing wood, plastic, metal
and building materials on a firm surface. It is suitable for
straight and curved cuts. When using designated suitable bi-
metal saw blades, flush cutting is also possible. The saw
blade recommendations are to be observed.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
a)
(1) Saw blade
(2) Base plate
(3) Lever for saw blade release
(4) Utility hook
(5) Pendulum action rotary switch
(6) Stroke rate preselection thumbwheel
(7) On/off switch
1 609 92A 6JT | (11.05.2021)
(8) Lock-off button for on/off switch
a)
(9) Battery
(10) Base plate release button
(11) Worklight
(12) Handle (insulated gripping surface)
a)
(13) Battery release button
(14) Saw blade receptacle
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Reciprocating saw
Article number
Rated voltage
A)
No-load stroke rate n₀
Tool holder
Stroke
Max. cutting depth
– In wood
– In steel (unalloyed)
– Pipe diameter
Weight according to EPTA-Pro-
cedure 01:2014
Recommended ambient tem-
perature during charging
Permitted ambient temperature
C)
during operation and during
storage
Recommended batteries
Recommended chargers
A) Measured at 20−25 °C with rechargeable
battery GBA 18V 12Ah.
B) Depends on battery in use
C) Limited performance at temperatures <0 °C
Noise/vibration information
Noise emission values determined according to
EN 62841‑2‑11.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 87 dB(A); sound power level
98 dB(A). Uncertainty K = 5 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 62841‑2‑11:
Cutting boards with saw blade S 3456 XF:
2 2
a = 10 m/s , K = 1.5 m/s ,
h,B
Cutting wooden beams with saw blade S 3456 XF:
2 2
a = 13 m/s , K = 2 m/s .
h,WB
GSA 18V-32
3 601 FA8 1..
V= 18
−1
min 0–2500
SDS
mm 32
mm 230
mm 20
mm 175
B)
kg 3.8−4.8
°C 0 ... +35
°C −20 ... +50
GBA 18V...
ProCORE18V...
GAL 18...
GAX 18...
GAL 36...
Bosch Power Tools