Table of Contents
Advertisement
If the confirmation screen of GUIDE Plus+ data download
appears, perform the following steps.
(For information about GUIDE Plus+ system
6
Press [2, 1] to select "Yes" and
press [OK].
Post Code
Current Country : Germany
This unit downloads GUIDE Plus+ data
several times a day.
CHANGE
7
Press the numbered buttons or
[3, 4, 2, 1] to enter your postal
code and press [OK].
GUIDE Plus+ data download starts. This takes about
30 minutes.
8
When the download has finished
Press [OK].
Set up is complete.
To stop partway
Press [RETURN
].
∫ If the clock setting menu appears
Set the clock manually (
70).
∫ To confirm that stations have been tuned
correctly (
65)
∫ To restart set up (
64)
∫ Settings of the TV Guide for Analogue
broadcasts (
right)
Note
≥When you turn the unit on after inserting the CAM and Smart Card,
depending on the card provider, a PIN code or parental control
code may be demanded. (
10)
TV Guide system
TV Guide system provides programme information from the
broadcasts station displayed on the television like a TV programme
magazine.
This unit can receive either of the TV Guides for the digital or
analogue broadcasts. After the Auto Setup (
set to receive the TV Guide for the digital broadcasts. It is required to
change the settings to use the TV Guide for the analogue
broadcasts. (
right)
[DVB-T] [Analogue]
You can use the GUIDE Plus+ system for TV Guide. (
Note
≥TV Guide does not work if the clock is not set correctly.
≥If "NTSC" has been selected for "TV System" (
system cannot be used.
≥If the unit is disconnected from the AC mains, all programme data
are not updated.
≥The receipt of the TV Guide system data is only possible via the
aerial input of this unit. It is not possible to receive the data via the
externally connected digital satellite receiver or digital set-top boxes.
≥It is possible to record analogue broadcasts using Manual
recording, even without changing the TV Guide Type, and vice
versa. (
27, 30)
10)
1
2
3
4
5
6
7
8
9
10
8) has completed, it is
To stop partway
10, 31)
Press [RETURN
69), the TV Guide
Settings of the TV Guide for Analogue
broadcasts
While stopped
Press [FUNCTION MENU].
Press [3, 4] to select "Others" and
press [OK].
Press [3, 4] to select "Setup" and
press [OK].
Press [3, 4] to select "Others" and
press [1].
Press [3, 4] to select "TV Guide
Type" and press [OK].
Press [3, 4] to select "Analogue
Channels" and press [OK].
Press [3, 4] to select the country and
press [OK].
Press [2, 1] to select "Yes" and
press [OK].
≥It will go into Standby status once, and the power will be
turned on again automatically. This procedure may take a
few minutes.
≥All of the TV Guide data for digital broadcasts and timer
recording settings will be erased.
After the power is turned on,
Download the GUIDE Plus+ data
following the instructions on the
screen.
≥It may take up to 2 hours to set up the GUIDE Plus+ system.
≥If the "Postal Code" screen is displayed, press
[3, 4, 2, 1] or the numbered buttons to enter the postal
code.
Confirm the message on the screen.
≥If "No Data" appears (
31, Editing TV Guide, Reference)
≥If "No Host channel detected." appears (
settings, Host Channel)
≥If "Data download was unsuccessful." appears (
Changing the settings, Data Download)
].
31, Changing the
31,
VQT4W64
9
Advertisement
Table of Contents
