MSI Q35MDO v2 Manual page 48

PCI IDE BusMaster
This item allows you to enable/ disable BIOS to used PCI busmastering for
reading/ writing to IDE drives.
Oc-Chip SATA Controller
These items allow users to enable or disable the SATA controller.
RAID M ode
This item is used to enable/disable the RAID function for SATA devices.
AHCI Devices Group
Press <Enter> to enter the AHCI settings sub-menu. The submenu displays the
status of auto detection of IDE devices.
AHCI Port0~5
Press <Enter> to enter the sub-menu. These submenu allow users to select
the type of devices connected to the system.
I/O Device Configuration
Press <Enter> to enter the sub-menu and the following screen appears:
COM Port 1
Select an address and corresponding interrupt for the first serial port.
COM Port 2
Select an address and corresponding interrupt for the second serial port.
Parallel Port
There is a built-in parallel port on the on-board Super I/O chipset that provides
Standard, ECP, and EPP features. It has the following options:
[Disabled]
[3BC/IRQ7]
[278/IRQ5]
[378/IRQ7]
Line Printer port 0
Line Printer port 2
Line Printer port 1
BIOS Setup
3-13