Kaiser KS 80420 User Manual page 10

≥ 1 0 ≥ 1 0
c m c m
10
≥ 30 cm ≥ 30 cm
≥ 1 0 ≥ 1 0
4
c m c m
EN
•Install the refrigerator on a perfectly
even and firm surface. When
aligning the refrigerator, its doors
must be closed.
• Use a level with a glass scale and a
bubble to make sure that the
refrigerator is in a level position; all
four legs must stand firmly on the
floor.
• If the refrigerator needs adjustment,
carefully tilt it and turn the front
adjustable leg until the refrigerator is
in the required position.
• Alignment of the refrigerator pre-
vents its displacement, vibration and
other issues.
• Do not replace the original aligning
legs with other legs.
• Wait at least 2 hours before plugging
the refrigerator in; this will help
ensure fault-free operation.
• After the product has been installed,
make sure that it is not standing on a
power cable;
• Alteration of device parts is prohib-
ited. Avoid damaging the capillary
tube visible in the rear wall recess for
the compressor. The capillary tube
must not be bent, unbent or twisted.
Damage to the refrigerator's capil-
lary tube will void the warranty!
• To ensure unhampered opening of
the refrigerator's door, there must be
5 cm clearance between the side of
the refrigerator (from the door hinge)
and the wall of the room where it has
been installed.
Leveling feet
• Turn the feet 1 clockwise or counter-
clockwise to achieve a stable
position of the refrigerator.