Ir Sensor; Joystick - Local Control - Philips 32PHG6825 User Manual

Table of Contents

Advertisement

To open the Netflix App directly. With the TV switched
on or from standby.
• If you have a Netflix subscription, you can enjoy
Netflix on this TV. Your TV must be connected to the
Internet.
• To open Netflix, press
App. You can open Netflix immediately from a TV in
standby.
www.netflix.com
2 -  Mute / Volume
Press in middle to mute the sound or to restore it.
Press  or  to adjust the volume.
3 - Number keys
To select a channel directly.
4 - (Dot)
To enter digital sub-channels.
5 -  EXIT /   Channe l
Press in the middle to switch back to watching TV or
to stop an interactive TV application.
Press  or  to switch to the next or previous
channel on the channel list.
6 -  SMART TV
To open the Smart TV start page.
7 - YouTube
To open the YouTube app directly.
8 -  LIST / TV GUIDE
Long press to open the channel list.
Short press to open or close the TV Guide.
3.2

IR sensor

The TV can receive commands from a remote control
that uses infrared (IR) to send commands. If you use
this kind of remote control, always point it at the
infrared sensor on the front of the TV.
 Warning
Do not put any objects in front of IR sensor of the TV
as it may block the IR signal.
to open the Netflix
3.3

Joystick - Local Control

Keys on TV
If you lost the remote control or its batteries are
empty, you can still do some basic TV operations.
To open the basic menu...
1 - With the TV switched on, press the joystick key at
the bottom of the TV to bring up the basic menu.
2 - Press left or right to
select  Volume,  Channel, or  Sources.
Select  Demo to start a demo movie.
3 - Press up or down to adjust the volume or tune to
the next or previous channel. Press up or down to go
through the list of sources, including the tuner
selection.
The menu will disappear automatically.
6

Advertisement

Table of Contents
loading

This manual is also suitable for:

6825 series43pfg6825

Table of Contents