Page 1
Shredder User Manual 1-800-327-8508 USA Only 1-310-793-5650 International Email: info@auroracorp.com For more information, please visit us at: AU608MB www.auroracorp.com Model No. Please read these operating instructions before using the unit.
Page 3
WARNING : SAFETY INSTRUCTIONS, READ BEFORE USING! Read instructions before use. Do not spray or keep any aerosol products in or around the shredder. Avoid touching the document Keep loose clothing or jewelry feed opening with hands. away from the paper entry slot. Product is not intended for use by Avoid getting hair near the children (product is not a toy).
Paper Shredder Sheet Capacity 6 Sheets of 20 lb. bond paper* Operating Instructions 5/32 in. x 15/32 in. pieces Installation Paper Shred Size 0.4 cm x 1.2 cm pieces Operation Paper Entry Width 8.7 in / 220 mm Maintenance Troubleshooting Credit Card Capacity 1 at a time Service Center Duty Cycle...
OPERATION Control Switch Using the switch located on the unit, select one of the following settings by sliding the switch either left or right. (FIGURE 2) FIGURE 2 Auto / On: This setting allows the shredder to be automatically started by inserting paper into the feed slot.
Page 6
OPERATION Paper / Credit Card Entry: Make sure you do not exceed sheet Insert one credit card at a time into the middle of the feed slot. count per pass (6 sheets max). Insert paper as straight as pos- sible into feed slot and release. NOTE: ...
MAINTENANCE Warning: Failure to properly maintain your shredder will void the warranty. Oil the shredder blades every month with basic vegetable, cooking oil or shredder oil. Follow oiling procedure below (FIGURE 3). It helps to keep the shredder blades operating well over many years of use. Oiling procedure: 1. Turn off shredder. 2.
TROUBLESHOOTING If there is a problem with your shredder, check below for the symptoms and steps to resolve. If you continue to have problems, contact customer support at our Service Center 1-800-327-8508. DO NOT ATTEMPT TO REPAIR BY OPENING THE SHREDDER HEAD. This will completely void the product warranty.
Page 9
TROUBLESHOOTING How to clear a paper jam in the shredder. 1) Switch the shredder over into Reverse (REV) mode. While in Reverse, the shredder will back up and loosen the jammed paper. If required, you may need to tug and remove several sheets to effectively clear the machine. When jammed paper is loosened or removed, switch back to the Auto-On mode to continue shredding.
Should there be a defect or malfunction of this product, Aurora will repair or replace the product free of charge. Customer is responsible for all shipping charges to return the defective product to Aurora. A copy of the proof of purchase showing original purchase date is required.
Need help?
Do you have a question about the AU608MB and is the answer not in the manual?
Questions and answers