Sharp 28JF-73H Operation Manual page 14

Manual Channel Preset (PRESET USING FREQUENCY TUNING)
1.
Depending on the programme channel you want to preset, press
the Single/Double entry button
entry.
2.
Select the programme channel number you want to preset with
the 0 ~ 9 digit buttons.
3.
Press the MENU button
4.
Press the BLUE button
5.
Press the Volume DOWN/UP buttons
white letters) the Channel type: CH (Aerial) or CC (Cable).
6.
Press the Channel DOWN button
7.
Press the Volume DOWN/UP buttons
The tuning sequence will stop when a signal is detected, if the
signal is not the required channel press the Volume DOWN
button or the Volume UP button
8.
Press the GREEN button
9.
Press the MENU button
Repeat the above procedure for presetting other programme channels.
to select single/double digit
to see the MAIN menu.
to see the TUNE menu.
/ to select (with
to select SEARCH.
CH
/ to start preset.
to continue.
to memorize.
to clear the on-screen display.
MAIN menu
TUNE menu
CHANNEL
SEARCH
F-TUNE
MODE
AUTO-TUNE
SEARCH
CHANNEL
SEARCH
F-TUNE
MODE
AUTO-TUNE
13
CH
CC
EDIT
EDIT
MEMORIZE
GREEN
Pr 06
CH21
Pr 06
CH21