Switching On; Stand-By Button - Sharp 28JF-73H Operation Manual

Switching on

Main power
This TV memorizes the Mode last used when it was switched off. When the
main power button (®) is pressed to turn on the set, the Power indicator
will light and the set will resume in either the Stand-by mode or Programme
mode, depending upon its condition when it was switched off.

Stand-by button

When the TV is in Stand-by mode, to turn on the TV press the Stand-by
button ( TV) on the remote control, or one of the four buttons on the TV
(V /\, VCH/\). The TV will change from Stand-by mode to Program
mode, the Power indicator will turn green from red and an image will
appear on the screen. Press the Stand-by button (
TV will return to Stand-by mode.
Blue background off timer
If weak signal conditions in TV or VCR mode, the screen will turn blue.
The blue background off-timer is then engaged, unless a good signal is
received, the set will automatically switch to Stand-by mode after
15 minutes.
TV) again and the
9
Power indicator
Main power button