Table of Contents
Advertisement
Quick Links
Operation Manual
Digital Water Bath Shaker
This unit is water bath shaker for professional, industrial, or educational use
where the preparation or testing of materials is done at approximately
atmospheric pressure and no flammable, volatile or combustible materials are
being heated.
MRC LTD.
Hagavish 3 st.
HOLON 58817
ISRAEL
Tel (+972)-3-5595252
Fax (+972)-3-5594529
Email:
Udi@mrclab.com
Website:
www.mrclab.com
3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529
WBT-200D
WBT-400D
/
service@mrclab.com
mrc@mrclab.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for MRC WBT-200D
Summary of Contents for MRC WBT-200D
- Page 1 Operation Manual Digital Water Bath Shaker WBT-200D WBT-400D This unit is water bath shaker for professional, industrial, or educational use where the preparation or testing of materials is done at approximately atmospheric pressure and no flammable, volatile or combustible materials are being heated.
- Page 2 • Do not position equipment in a manner that prohibits access to power cord. • Do not attempt to move the unit during operation or before the unit has been allowed to cool. 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com...
-
Page 3: Receiving Your Unit
Once you have determined the unit is free from damage, locate the data label at the back of the unit. The data label indicates your unit’s model number and serial number. 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com... -
Page 4: Installation
Allow a minimum of 30 cm between the unit and any walls or partitions that might obstruct free airflow. 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com... - Page 5 Units are cleaned at the factory, but not sterilized. Remove any racks if assembled and clean the bath with a disinfectant that is suitable for your application. See Maintenance Section for cleaning instructions and precautions. 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com...
- Page 6 If the LED is lit, it is indicate that the tank is empty or there is not enough water in the tank 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com...
- Page 7 Fill water minimum until the LED is OFF or fill more water above the minimum permitted Remember that if the tank is empty or if the water level is too low, the heating process will not start. Internal parts overview 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com...
- Page 8 Lamp flashes during auto-tuning operates ⑮ Lock indicator Setting parameter The PV display indicates the parameter symbol, and the SV display indicates the selected value of the selected parameter. 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com...
- Page 9 PID control by using its new PID values. The PID values obtained are stored in nonvolatile memory. Note: To enable auto-tuning the lock parameter should be set to 1000. 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com...
- Page 10 Shaker Controller 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com...
- Page 11 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com...
-
Page 12: Operation
Allow at least two (2) hours for the temperature to stabilize. Never turn on the unit if the tank is empty from water or if the water level is too low 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com... -
Page 13: Maintenance
4. Empty and clean the tank. 5. Please see Lifting and Handling for further instruction. 6. No maintenance is required on any of the electrical components 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com... - Page 14 Section 7 SCHEMATICS 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com...
Need help?
Do you have a question about the WBT-200D and is the answer not in the manual?
Questions and answers