Table of Contents
Advertisement
2. WIRING
2.1 Various connector types:
2.2 Wiring diagram of insert cable and headphones plug-
Unbalanced use of
mono 1/4" jack plugs-
Tip=
Signal
Sleeve=
Ground/Shield
Tip
Sleeve
Strain relief clamp
3. FEATURES & SPECIFICATIONS
Features:
2/4 mono microphone inputs, 2/4 stereo inputs.
XLR Mic connectors on all mono channels.
Low-noise discrete Mic pre-amplifiers on all microphone inputs.
Balanced 1/4" stereo jacks and balance controls on all stereo channels.
Separate stereo RCA jacks.
Stereo output for recording applications.
3 band frequency equalizer for mono inputs and stereo inputs(BM06DSP only).
High-grade-sealed potentiometers.
Separate USB interface that reads audio files stored by USB-disk (support mp3 and wav formats).
Support for wireless Bluetooth receive tone signal.
Internal professional DSP digital effect processor.
Headphones output with dedicated volume control.
Built-in +48V phantom power for condenser mics.
Extremely rugged construction ensures long life even under the most demanding conditions.
Balanced use with XLR connectors
1 = Ground / Shield
2 = Hot (+ve)
3 = Cold (-ve)
Input
For unbalanced use pin 1 and pin 3 have to be bridged
Balanced use of
stereo 1/4" jack plugs-
Tip=hot
Ring=cold
Sleeve=
Ground/Shield
Tip
Ring
Sleeve
Strain relief clamp
For connection of balanced and
unbalanced plugs, ring and sleeve have
to be bridged at the stereo plug.
Output
Headphones 1/4" connector-
Tip=
Left Signal
Ring=
Right Signal
Sleeve=
Ground/Shield
Tip
Ring
Sleeve
Strain Relief Clamp
6
Advertisement
Table of Contents
