Effect Programs - Pro-Tech BM06DSP User Manual

1.3 Effect Programs

Here you can find a list of all presets stored in the multi-effects processor. This built-in effects module
produces high-grade standard effects such as reverb, Chorus, flanger, delay and various combination
effects. Use the Aux Send FX on the channels and the Aux Send FX master control to determine the input
signal of the effects processor. The built-in stereo effects processor has the advantage that it does not
need to be wired up. This excludes the danger of humming or level mismatch right from the start and thus
considerably facilitates use. These effect presets are classical "mixing effects". If you move the STEREO
AUX RETURN FX control, you mix the channel signal (dry) and the effect signal. You can control the
balance between the two signals with the channel fader and the STEREO AUX RETURN FX control.
Program
No.
1 REV HALL 1
2 REV HALL 2
3 REV ROOM 1
4 REV ROOM 2
5 REV STAGE 1
6 REV STAGE 2
7 REV PLATE
8 DRUM AMB
9 EARLY REF
10 GATE REV
11 SINGLE DLY
12 DELAY
13 VOCAL ECHO
14 KARAOKE
15 PHASER
16 PLANGER
17 CHORUS 1
18 CHORUS 2
19 SYMPHONIC
20 TREMOLO
21 AUTO WAH
22 RADIO VOICE
23 DISTORTION
24 PITCH CHANGE
* "LFO" stands for Low Frequency Oscillator. An LFO is normally used to periodically modulate another signal, using
different waveform shapes and modulation speeds.
Parameter
Reverb Time
Reverb simulating a large space such as a concert hall.
Reverb Time
Reverb Time
Reverb simulating the acoustics of a small space (room).
Reverb Time
Reverb Time
Reverb simulating a large stage.
Reverb Time
Simulation of a metal-plate reverb unit, producing a more hard-
Reverb Time
edged reverberation.
Reverb Time A short reverb that is ideal for use with a drum kit.
An effect which isolates only the early reflection components from
Room Size
reverberation, creating a "flashier" effect than conventional reverb.
An effect which cuts halfway the tail-end of the reverberation, making
Room Size
a more powerful sound.
An effect which repeats the same sound only once. Shortening the
Delay Time
delay time produces a doubling effect.
Delay Time Feedback delay adding multiple delayed signals.
Delay Time Echo designed for conventional vocals.
Delay Time Echo designed for karaoke (sing-along) applications.
Cyclically changes the phase to add modulation to the sound.
LFO* Freq
Adds modulation to the sound, producing an effect similar to the rise
LFO* Freq
and fall sound of a jet engine.
LFO* Freq
Creates a thicker ensemble-like sound by adding the multiple sounds
with different delay times.
LFO* Freq
LFO* Depth Multiples the sound for thicker texture.
LFO* Freq An effect which cyclically modulates the volume.
A wah-wah effect with cyclical filter modulation. The PARAMETER
LFO* Freq
knob adjusts the speed of the LFO* that modulates the "wah" filter.
Recreates the lo-fi sound of an AM radio. The PARAMETER knob
Cutoff Offset
adjusts the frequency band to be emphasized.
Adds a sharp-edged distortion to the sound.
Drive
An effect which changes the pitch of the signal.
Pitch
Description
4