Table of Contents
Advertisement
MAIN OUT: The MAIN OUT connectors are balanced mono jacks. The main mix signal appears here
16
at a Level of 0 dBu. The MAIN LEVEL adjusts the volume of these outputs.
REC OUT: These connectors are wired in parallel with the MAIN OUT and carry the main mix signal
17
(unbalanced). Connect the REC OUT to the inputs of your recording device. The output level is
adjusted via MAIN LEVEL.
18
AUX IN: The AUX inputs are used to bring an external signal source (e.g. CD player, tape deck, etc.)
into the console.
+4/-10: The stereo inputs have an input sensitivity switch which selects between +4 dBu and -10 dBV.
19
At -10 dBV (home-recording level), the input is more sensitive (requires less level to drive it) than at
+4 dBu (studio level).
Digital Effects Processor section
20
PROGRAM control
The effect processor consists of 24 PCS effect types. Turn the program/parameter knob to adjust the
serial number of the effect. The led digital tube flashes during the adjustment. After adjusting the serial
number of the effects you want to select, while the led digital tube still flashes, press the program
knob to select the effect type of the led digital tube display number. When the program knob rotates
counterclockwise, the digital tube display number decreases. When the program knob rotates clockwise,
the digital tube display number increases.
PARAMETER control
For adjusting the parameter (depth, speed, etc.) for the selected effect. The last value used with each
effect type is saved.
NOTE: When you change to a different effect type, the mixer automatically restores the value that was
previously used with the newly selected effect (regardless of the current position of the PARAMETER).
FX LEVEL: The FX LEVEL control feeds the FX signal into the main mix. If the control is turned all the
21
way counterclockwise, no FX signal is present in the sum signal of the mixing console.
AUX/USB/BT LEVEL: The AUX/USB/BT LEVEL control feeds the AUX/USB/BT signal into the main mix.
22
If the control is turned all the way counterclockwise, no AUX/USB/BT signal is present in the sum signal
of the mixing console.
PHONES/CTRL ROOM: The PHONES/CTRL ROOM control adjusts the level of both HEADPHONES and
23
CTRL ROOM outputs.
24
MAIN LEVEL: The MAIN LEVEL control adjusts the level of all outputs.
BREAK: The BREAK control mutes all outputs.
25
26
USB/AUX TO CTRL ROOM: Press the USB/AUX switch if you want to monitor the USB/AUX input via
the CTRL ROOM OUT. This provides an easy way to monitor the signals input from the USB/AUX input.
Make sure they are correct and then adjust the AUX/USB/BT level knob to transmit the USB/AUX signal
to the main output.
FX TO CTRL ROOM: Press the FX switch if you want to monitor the FX signal via the CTRL ROOM OUT.
27
This provides an easy way to monitor the signals input from the FX. Make sure they are correct and then
adjust the FX level knob to transmit the FX signal to the main output.
28
LEVEL INDICATOR: The high-precision 4-segment display accurately displays the relevant signal level.
USB MODULE
29
Press to play/pause playback.
Press to go to previous track. Press and hold to turn volume down.
Press to go to next track. Press and hold to turn volume up.
MODE Press to select playback of USB or Bluetooth. When BLUE is displayed in the screen, turn on
your phone Bluetooth and search for PRO TECH. Then connect to play the audio in your phone.
This mixer supports u disk recording and computer recording.
REC
USB:
Press REC button to start recording. Press again to pause recording.
Press and hold REC button to save and play recording file.
PC:
After connecting to the computer, start the software "adobe audition" for recording.
You can also try recording with other recording software.
3
Advertisement
Table of Contents
