Table of Contents
Advertisement
Installation
3.3 Removing the transit bolts
PRECAUTION
• Do not remove the transit bolts before removing the
A
packaging reinforcement.
• Remove the transit bolts before operating the washing
machine! Otherwise, the product will get damaged.
1 Use a tool to loosen all bolts until they rotate freely. (C)
2 Remove the transit bolts by turning them slightly.
3 Attach the plastic covers supplied in the user manual bag into the holes on the rear
panel. (P)
INFORMATION
• Keep the transit bolts in a safe place to reuse when the
C
product needs to be moved again in the future.
• Never move the product without the transit bolts properly
fixed in place!
20 / EN
1
2
3
Washer-Dryer
Advertisement
Table of Contents
