Table of Contents
Advertisement
Installation
3.4 Connecting water supply
INFORMATION
• The water supply pressure required to run the product is
C
between 1 to 10 bars (0.1 – 1 MPa). It is necessary to have
10 – 80 liters of water flowing from the fully open tap in
one minute to have your product run smoothly. Attach a
pressure reducing valve if water pressure is higher.
CAUTION
• Models with a single water inlet should not be
connected to the hot water tap. In such a case the
A
laundry will get damaged or the product will switch to
protection mode and will not operate.
• Do not use old or used water inlet hoses on the new
product. It may cause stains on your laundry.
1 Connect the special hose supplied with the product to the water inlet on the
product.
CAUTION
• Ensure that the cold water connection is made
A
correctly when installing the product. Otherwise, your
laundry will come out hot at the end of the washing
process and wear out.
User's Manual
1
2
3
21 / EN
Advertisement
Table of Contents
