Samsung CLP-300N/XEU Service Manual page 64

Alignment and Adjustmens
LED behavior
Status LED
(Green/Red)
Green LED ON
Green LEDS
LOWLY BLINK
Green LED
FAST BLINK
Red LED BLINK
Red LED ON
Red LED ON
Red LED ON
Green/Red BLINK
N/A
N/A
N/A
N/A
N/A
Service Error LED Operation
All LEDs blink the each time interval.
Service Error
Fuser Error Open Fuser Error
No Heat Error
Over Heat Error
Scanner Error P Motor Error
(=LSU Error)
H Sync Error
Service Manual
6-4
Black-only Toner-low
LED (CMYK)LEDs
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
BLINK CMYK BLINK
N/A Toner-low(black) ON
N/A Toner-low(cyan) ON
N/A Toner-low(magenta) ON
N/A Toner-low(yellow) ON
ON N/A
LED operation
All LEDs (Toner low LEDs, Status (Red) LED, Black only LED) blink
a time interval of 1 second.
All LEDs (Toner low LEDs, Status (Red) LED, Black only LED) blink
a time interval of 4 seconds.
All LEDs (Toner low LEDs, Status (Green/Red) LED, Black only
LED) blink a time interval of 1 second.
All LEDs (Toner low LEDs, Status (Green) LED, Black only
LED) blink a time interval of 1 second.
All LEDs (Toner low LEDs, Status(Green) LED, Black only LED)
blink a time interval of 4 seconds.
Status
Ready to receive the data.
Receiving the data from the host.
Printing the page.
Paper source is set to MANUAL .
Need to push the button to start the
printing
Out of paper
Cover open
Paper jam
Service error ( LSU or Fuser error)
Black toner needs to change
Cyan toner needs to change
Magenta toner needs to change
Yellow toner needs to change
Black only key is pressed
Samsung Electronics