Table of Contents
Advertisement
DRIVING
Collision Mitigation Braking System™ (CMBS™)
Can assist you when there is a possibility of your vehicle colliding with a vehicle or a
pedestrian detected in front of yours.
The system can give you visual, audible, and tactile alerts when a potential collision
is determined, and reduce your vehicle speed to help minimize collision severity
when a collision is deemed unavoidable.
Beep
Steering vibrations
When a potential collision with a detected oncoming vehicle is determined, a BRAKE
message appears in the multi-information display, the head-up warning lights flash,
a beep sounds, and the steering wheel vibrates.
The system activates when:
• The speed difference between your vehicle and a vehicle or pedestrian detected
in front of you is about 3 mph (5 km/h) and over with a chance of a collision.
• Your vehicle speed is about 62 mph (100 km/h) or less and there is a chance of a
collision with an oncoming detected vehicle or a pedestrian in front of you.
Alert Stages
The system has three alert stages for a possible collision. Depending on the
circumstances or CMBS settings, CMBS may not go through all of the stages
before initiating the last stage.
Stage 1: Visual and audible warning, steering wheel vibrations
Stage 2: Visual and audible warning, light brake application
Stage 3: Visual and audible warning, strong brake application
Important Safety Reminder
CMBS is designed to reduce the severity of an unavoidable collision. It does not
prevent collisions nor stop the vehicle automatically. It is still your responsibility to
operate the brake pedal and steering wheel appropriately according to the driving
conditions.
110 |
Head-up
warning lights
Changing Settings
Determine the warning timing. The vehicle must be in Park (P).
1. From the HOME screen, select Settings.
2. Select Vehicle Settings.
3. Select Driver Assist System Setup.
4. Select Forward Collision Warning Distance.
5. Select Long, Normal, or Short.
6. Press BACK to exit the menu.
Turning CMBS On or Off
Press and hold the CMBS OFF button. A beep sounds
and a message appears in the multi-information display.
The CMBS indicator appears when the system is off.
Parking Sensor System*
When the system senses an object when you are parking or backing up, indicators
appear on the upper display and a series of beeps will sound.
Turning the System On or Off
Press the parking sensor button to turn the system
on or off. A green indicator light appears on the
button when the system is on.
DRIVING
CMBS
OFF
button
Screen indicators
| 111
Advertisement
Table of Contents
