Engine Oil - Honda Accord Hybrid Sedan 2017 Owner's Manual

MAINTENANCE

Engine Oil

Park the vehicle on level ground, and turn the power system off. Wait about three
minutes before you check the oil.
Checking the Oil
1. Remove the dipstick (orange).
2. Wipe the dipstick with a clean cloth or paper
towel.
3. Insert the dipstick back all the way into its hole.
4. Remove the dipstick again, and check the level.
It should be between the upper and lower marks.
Add oil if necessary.
Recommended Engine Oil
• Honda Genuine Motor Oil
• Premium-grade 0W-20 detergent oil with an API Certification Seal on the
container
This seal indicates the oil is energy conserving and
that it meets the American Petroleum Institute's
latest requirements.
Use Honda Genuine Motor Oil or another
commercial engine oil of suitable viscosity for the
ambient temperature as shown.
You may also use synthetic motor oil if it is labeled
with the API Certification Seal and is of the
specified viscosity grade.
130 |
Upper mark
Lower mark
Ambient temperature
Adding Oil
1. Unscrew and remove the engine oil fill cap.
2. Add oil slowly.
3. Reinstall the engine oil fill cap, and tighten it
securely.
4. Wait for three minutes and recheck the engine oil
dipstick.
NOTICE
Do not fill the engine oil above the upper mark. Overfilling the engine oil can result
in leaks and engine damage.
Resetting the Engine Oil Life
If you change or replace the vehicle's engine oil yourself, you must reset the
engine oil life.
Use the Info (p/q) and SEL/RESET buttons on the steering wheel buttons to
control the display.
1. Scroll to the Vehicle Settings screen, and select
it.
2. Scroll to the Maintenance Reset screen, and
select it.
3. Select Reset. The maintenance codes disappear,
and the engine oil life display returns to 100%.
NOTICE
Failure to reset the Maintenance Minder™ display after a maintenance service
results in the system showing incorrect maintenance intervals, which can lead to
serious mechanical problems.
MAINTENANCE
Engine Oil Fill Cap
| 131