Table of Contents
Advertisement
HCE2000
IX. Operation
m Warning! Be prepared for the recoil force of the emitted water jet! Ensure
that you are standing firmly and that you are holding the gun (14) securely,
otherwise you could injure yourself or other people.
Never operate the high pressure washer with a closed water tap. Dry running
will damage the high pressure washer!
Using the hose reel (Fig.1)
1
Ensure, that the crank handle is unfolded.
2
Pull the required length of the high pressure hose (3) from the handle with hose
reel (1).
3
To roll up the high pressure hose (3) use the crank handle (2).
Using the gun (Fig.1/4)
1
Turn on the water tap entirely.
2
Switch on the high pressure washer with the On / Off switch (5). Only ever
switch on the high pressure washer once you have connected all of the water
pipes and they do not leak. The motor switches on until the required pressure
has built up. After the pressure has built up, the motor switches off.
3
Press the safety switch (C) to unlock the gun starting lever (D). The nozzle oper-
ates by pressure and the motor switches back on.
4
Releasing the gun starting lever (D) causes the high pressure washer to switch
off. The system remains pressurised.
5
After using the high pressure washer press the safety switch (C) to lock the gun
starting lever.
Usage of the accessories (Fig.4)
Variable nozzle (15): This accessory is intended for ordinary cleaning works and
cleaning vehicles. The water jet can be adjusted by turning the variable nozzle (15).
Turbo nozzle (16): This accessory is intended for stubborn dirt. Do not use this ac-
cessory to clean vehicles.
AFTER SALES SUPPORT
1300 855 831
MODEL: HCE2000 PRODUCT CODE: 10490 09/2019
support@scheppach.com.au
AUS
Operation
21
Advertisement
Table of Contents
