Table of Contents
Advertisement
HCE2000
sure washer.
3
Mounting of the supply connection hose (Fig.3)
1
Remove the black cap from the connection for supply connection hose (6). The
black cap can be disposed.
2
Connect the supply connection hose (7) with the connection for supply connec-
tion hose (6).
Mounting of the high pressure hose and the gun (Fig.4)
1
Plug the high pressure hose (3) into the gun (18).
2
For removal of the high pressure hose (3), push the lever (B) and pull out the
high pressure hose (3).
Mounting of the extension lance and the accessories (Fig.4)
1
Plug the extension lance (17) into the gun (18) and twist it.
2
Plug the required nozzle (15; 16; 19) into the extension lance (17).
3
For removal, press the button (A) and remove the accessory.
VIII. Before operation
It is recommended for the power supply to this high pressure washer either to be
connected via a residual current device circuit-breaker, which interrupts the power
flow as soon as the leakage current to earth exceeds 30 mA for 30 ms, or for it to be
equipped with an earth tester.
Before you connect the high pressure washer to the mains supply make sure that
the data on the rating plate are identical to the mains data. Warning! Always pull
the power plug before making adjustments to the high pressure washer.
Using the high pressure washer correctly
• The high pressure washer must be stood on a level, stable surface.
• It is recommended that you adopt the correct operating position every time you
use the high pressure washer with one hand on the gun and the other on the
lance.
AFTER SALES SUPPORT
1300 855 831
MODEL: HCE2000 PRODUCT CODE: 10490 09/2019
Assembly/Before operation
support@scheppach.com.au
AUS
19
Advertisement
Table of Contents
