Product Overview; Controls - Toro TimeCutter SS 4250 Operator's Manual

Product Overview

1. Footrest
2. Deflector
3. Height-of-cut lever
4. Motion-control lever
5. Control panel
6. Operator seat
7. Engine

Controls

Become familiar with all the controls in
Figure 5 before you start the engine and operate the
machine.
Figure 4
8. Gas-tank cap
9. Smart Speed™ lever
10. Rear drive wheel
11. Mower deck
12. Anti-scalp roller
13. Front caster wheel
Figure 4
g028411
1. Throttle
2. Choke
Ignition Switch
The ignition switch has 3 positions: O
S . The key turns to S
TART
R upon release. Turning the key to the O
UN
stops the engine; however, always remove the key
when leaving the machine to prevent someone from
accidentally starting the engine
Throttle Control
and
The throttle controls the engine speed and it has a
continuous variable setting from the S
position (Figure
Choke Control
Pull up the choke control until it stops to choke the
engine (Figure
normal engine operation.
Blade-Control Switch (Power
Takeoff)
The blade-control switch, represented by a
power-takeoff (PTO) symbol, engages and
disengages power to the mower blades
Motion-Control Levers and Park
Position
The motion-control levers are speed-sensitive controls
of independent wheel motors. Moving a lever forward
15
Figure 5
Control panel
3. Blade-control switch
(power takeoff)
4. Ignition switch
and moves back to
TART
(Figure
5).
5). Push down the choke control for
g032603
, R , and
FF UN
position
FF
5).
to F
LOW AST
(Figure 5).