Table of Contents
Advertisement
Audio
Cannot switch audio.
The audio cannot switch, if "Digital Audio
Output" is set to "Bitstream". Set "Digital
Audio Output" to "PCM". (
Cannot hear the desired audio type.
Check the connections and the "Digital Audio
Output" settings. (
[BDT335] When connecting this unit to a TV
via an HDMI AV OUT MAIN and to an
amplifier/receiver via an HDMI AV OUT SUB,
set "HDMI(SUB) Output Mode" to
"V.OFF(Video Off)". (
To output audio from a device connected with
an HDMI cable, set "HDMI Audio Output" to
"On" in the Setup menu. (
There is no sound coming out from the TV.
[BDT335]
Audio may not output from the TV when the
amplifier/receiver is connected to the HDMI
AV OUT SUB, and "HDMI(SUB) Output
Mode" (
31) is set to "V.OFF(Video Off)". In
such a case, output audio from the amplifier/
receiver. To output audio from the TV, set the
"HDMI(SUB) Output Mode" to "Normal".
31)
11, 31)
11)
31)
Reference
Playback
Disc cannot be played.
The disc is dirty. (
The disc is not finalized. (
Still pictures (JPEG) do not play back
normally.
The images that were edited on the PC, such
as Progressive JPEG, etc., may not be played
back.
I can't play back BD-Live.
Confirm that this unit is connected to the
broadband Internet. (
Confirm the "BD-Live Internet Access"
settings. (
Confirm a USB device is connected to the
USB port. (
- 39 -
5)
7)
13)
34)
17)
Advertisement
Table of Contents
