Panasonic DMP-BDT235 Operating Instructions Manual page 35

System
∫ Easy Settings
You can execute basic settings.
∫ TV Settings
Press [OK] to show the following settings:
TV Aspect
Set to match the type of TV connected.
When connected to a 4:3 aspect TV and playing
16:9 ratio image:
The sides are
cut off so the
picture fills
4:3 Pan & Scan the screen.
When playing BD-Video,
video is output as "4:3
Letterbox".
Black bands
appear at
4:3 Letterbox the top and
bottom of
the picture.
When connected to a 16:9 widescreen TV and
playing 4:3 ratio image:
Video is displayed as a 4:3
16:9 ratio image in the centre of
the screen.
Video is displayed as a
16:9 full horizontally stretched 16:9
image.
Settings
TV System
Perform the setup so it matches the TV System
of the connected TV.
Screen Saver Function
This is to prevent image retention on the
screen.
≥ When this is set to "On":
If a list of playback content is displayed and
there is no operation for 10 minutes or more,
the screen switches to HOME menu
automatically.
≥ While playing and pausing, etc., this function
is not available.
On-Screen Messages
Choose whether to show status messages
automatically.
HDMI CEC
Set to use "HDMI CEC" function when
connected via HDMI cable to a device that
supports "HDMI CEC".
≥ Select "Off" when you do not want to use
"HDMI CEC".
- 35 -