Connecting to External Devices
Video Input
Connect the video cable as shown in the below figure and then connect the
1
power cord. (See page 14).
When connecting with a BNC cable.
• Connect the input terminal with a proper color match.
BNC Cable
(not included)
Select an input signal.
2
Press the INPUT button on the remote control to select the input signal.
INPUT →
Or, press INPUT on the bottom of the set.
INPUT →◄ ► → AUTO/SET
When connecting with an BNC cable.
• Select AV.
Input List
AV
Component
Product
Audio Cable
(not included)
VCR/DVD Receiver
→ OK
RGB
HDMI/DVI
SuperSign
20