Table of Contents
Advertisement
Audio/Video Cables
(
AH069G 3-ft /
)
AH070G 5-ft
These cables are
shielded for connecting AUDIO and
VIDEO jacks. They have RCA-type phono
plugs on each end.
Coaxial RF Cables (AH065G 6-ft /
AH066G 10-ft)
These RF cables are
used with the RF
output adapter to
connect your
camcorder to a standard TV (one without
audio/video input jacks) for playback.
You may need other accessories.
193983 Cable Transformer
This 300-to-75 ohm
transformer is used to connect
a standard (300 ohm) antenna
twin-lead to a standard round
75-ohm connector.
AH011 Cable Transformer
This 75-to-300 ohm
transformer is used to
connect a standard 75
ohm antenna cable to
the 300-ohm screw terminals on a TV.
AH25 Y-Adapter
This Y-adapter allows you to connect
your camcorder's mono audio cable to a
stereo TV or VCR.
All specifications and descriptions of accessories are subject to change without notice.
4
All manuals and user guides at all-guides.com
Optional AC088 Tripod
Mounting the camcorder on a tripod,
such as AC088, will keep the camcorder
steady. This tripod's fluid-effect head
provides smooth camera pan and tilt. The
grooved, tubular 3-section leg design
folds down to 26" when not in use.
Rubber feet allow for sure footing.
Cautions: Before using a tripod, make sure it is
stable enough to hold the camcorder without
falling over.
When attaching your camcorder to a tripod, be
careful not to force the tripod screw into the
camcorder's tripod mounting hole.
The tripod screw should not protrude into the
camcorder more than approximately three-
eighths (3/8) inch. Forcing the screw could
damage the mounting hole on the bottom of the
camcorder.
Do not transport camcorder attached to tripod.
Advertisement
Table of Contents
