Remote-Controlling Connected Devices From The Mm 450 - Sennheiser MM 450 Instruction Manual

Using the MM 450
18

Remote-controlling connected devices from the MM 450

You can directly remote-control any device supporting the AVRCP profile
and connected to the MM 450 by using the buttons on the headset. Please
refer to the instruction manual of your audio source for information on
whether your device supports the AVRCP profile.
If your device does not support the AVRCP profile, you can use an optional
dongle. Using the iPod dongle or the USB dongle, you can remote-control
the connected devices from the headset.
Remote-controlling the audio source from the MM 450
If your headset has a Bluetooth connection to an audio source (e.g. iPod,
MP3 or CD player), you can use the MM 450 to remote-control the audio
source as follows:
Button Duration Function
Incrementally
increases the
volume
Continuously
increases the
1 s
volume
Skips to the
next track
Fast-forwards
the track
1 s
Plays and
repeats the
track
These functions are not supported by all connected Bluetooth devices.
Button Duration Function
Incrementally
reduces the
volume
Continuously
reduces the
1 s
volume
Skips to the
previous track
Rewinds the
track
1 s
Stops the track
(acknowledge-
1 s
ment tone)