Connecting The Mm 450 To The Audio Source - Sennheiser MM 450 Instruction Manual

Putting the MM 450 into operation
12

Connecting the MM 450 to the audio source

CAUTION! Danger of malfunction!
The transmitted radio waves can impair the operation of
sensitive and unprotected devices.
Only use the headset in aircraft where wireless Bluetooth
transmission is permitted or use the audio cable instead
(see "Connecting the MM 450 using the audio cable" on
page 15).
The headset complies with the Bluetooth 2.1 standard. In order that data
can be transmitted wirelessly using Bluetooth technology, you have to
register your headset with your audio source (pairing).
The headset can save the connection profiles of up to 8 Bluetooth devices
with which it has been paired. After switch-on, the headset automatically
connects to one of these devices.
If you pair the headset with a ninth audio source, the saved connection
profile of the first Bluetooth device will be overwritten. If you want to re-
establish a connection with the first audio source, you have to pair the
headset with this audio source again.
If your audio source does not have a Bluetooth interface, use an optional
dongle (see "Accessories and spare parts" on page 24).
For an optimum listening experience, your audio source has to
support the A2DP profile.