Stamina 15-0340A Owner's Manual page 9

ASSEMBLY INSTRUCTIONS
STEP 4
Attach the SEAT(26) to the SEAT FRAME(5) with BUTTON HEAD BOLTS(M8x1.25x20mm)(66)
and WASHERS(M8)(79). Insert the SEAT FRAME(5) into the MAIN FRAME(1) and secure with the
ADJUSTMENT KNOB(99).
NOTE: Make sure that the pin on the ADJUSTMENT KNOB(99) is inserted into one of the holes in the
SEAT FRAME(5). The ADJUSTMENT KNOB(99) should be screwed in tight to make the SEAT
FRAME(5) fit securely in the MAIN FRAME(1).
STEP 5
Attach the HANDRAIL(7) to the SEAT FRAME(5) with BUTTON HEAD BOLTS(M8x1.25x40mm)(65) and
ARC WASHERS(M8)(78).
STEP 6
Attach the BACK SUPPORT(6) to the SEAT FRAME(5) with BUTTON HEAD BOLT(M8x1.25x80mm)
(98), WASHERS(M8)(79), and NYLOCK NUT(M8x1.25)(80). Lock the BACK SUPPORT(6) in the upright
position with the PULL PIN(60).
STEP 7
Attach the BACK CUSHION(27) to the BACK SUPPORT(6) with BUTTON HEAD BOLTS(M8x1.25x40mm)
(65) and WASHERS(M8)(79).
9