Gardner Denver EDF-KB Operating And Service Manual page 33

NAMEPLATE
FULL LOAD
OPERATING PRESSURE
100 PSI (6.9 Bars)
125 PSI (8.6 Bars)
Load setpoint cannot be set within 8 psi (.6 Bar) of the unload
setpoint.
Minimum operating pressure is 60 to 65 PSIG (4.1 to 4.5 Bars).
FIGURE 4–8 – MAXIMUM SETPOINTS FOR AUTO SENTRY "S" CONTROLLER, PSIG
FIGURE 4–9 – AUTO SENTRY "S" SOLID STATE CONTROL TOUCH PAD
CONTROL SYSTEM PRESSURE
LOAD
100 PSI (6.9 Bars)
125 PSI (8.6 Bars)
13–8–606 Page 25
UNLOAD
108 PSI (7.5 Bars)
133 PSI (9.2 Bars)