Setting Or Changing The Start Delay - Atag VA6011HT User Instructions

Operating Instructions
3. Release the cycle button.
4. Close the dishwasher door. The newly selected dishwashing cycle will
commence from the beginning.
Interrupting the dishwashing cycle by opening the dishwasher door
1. Open the door of the dishwasher. The dishwashing cycle will stop.
0
2. Close the dishwasher door. The dishwashing cycle will continue.
Aborting the dishwashing cycle (RESET)
0 1. Open the door of the dishwasher.
2. Press function buttons 2 and 3 for approx. 1 second and keep them
pressed.
The LED indicators for all the buttons in the control panel that are now
able to be selected will become illuminated.
3. Release the function buttons.
The dishwashing cycle has been aborted.
4. Switch off the dishwasher by pressing the ON/OFF button.

Setting or changing the start delay

Using the start delay timer you can adjust when within the next 19
hours the dishwashing cycle is to begin.
Setting the start delay:
0 1. Open the door of the dishwasher.
2. Press the ON/OFF button.
The LED indicators for all the buttons in the control panel that are now
able to be selected will become illuminated.
3. Continue pressing the Y button until the number of hours until the
dishwashing cycle is to start is flashing in the multi-display.
4. Press the button for the desired dishwashing cycle.
The length of the selected dishwashing cycle will flash for a moment in
the multi-display, and then the selected starting time will be displayed
again.
5. Close the door.
The dishwashing cycle will start automatically following a countdown
of the hours set.
Changing the start delay:
As long as the dishwashing cycle has not started, you are still able to
cancel the start delay by pressing the Y button.
30