Using Special Functions - LG AP12RT Owner's Manual

Using Special Functions

1
Turn the appliance on.
2
Press FUNC button repeatedly to select the
desired function.
3
Press SET/CANCEL button to finish.
Display
Description
Screen
To reduce noise from outdoor
units.
To remove moisture generated
inside the indoor unit.
NOTE
• Some functions may not be supported,
depending on the model.
• Some functions may operate differently from
the remote control display.
Canceling Special Functions
1
Press FUNC button repeatedly to select the
desired function.
2
Press SET/CANCEL button to cancel the
function.
28
Using the Silent Function
This function prevents potential claims by
neighbors, reducing noise from outdoor units.
• is displayed on the display screen.
NOTE
• This function is disabled when you press
MODE or ENERGY CTRL or JET MODE
button.
• This function is available with Cooling, Heating,
Auto Changeover, Auto Operation Mode.
• When connected to the Multi Outdoor unit, this
function may not be supported.
Using the Auto Clean Function
In the Cooling and Dehumidification Mode,
moisture is generated inside the indoor unit. This
function removes such moisture.
• is displayed on the display screen.
NOTE
• Some functions cannot be used while the Auto
Clean function is in operation.
• If you turn off the unit, the fan continues to run
for 30 minutes and cleans the inside of the
indoor unit.
• is displayed on some indoor units,
depending on the model.
EN
29 / 206