Flair Furnishings CK 6280 Assembly Instructions Manual

MODEL
PRODUCT SIZE :
Thank you for purchasing this product. Before starting assembly we suggest you spend a short time reading
through this leaflet, then follow the simple step by step guide.
Two persons are needed to assemble this product.
* Approximately 1 Hours
* 2 People Required
IMPORTANT - READ CAREFULLY - RETAIN FOR FUTURE REFERENCE
a) WARNING "High beds and the upper bed of bunk beds are not suitable for children under six years due to the risk of injuryfrom falls";
b) WARNING "Bunk beds and high beds can present a serious risk of injury from strangulation if not used correctly. Never attach or
hang items to any part of the bunk bed that are not designed to be used with the bed,for example, but not limited to ropes, strings,
cords, hooks, belts and bags"
c) WARNING "Children can become trapped between the bed and the wall, a roof pitch, the ceiling, adjoining pieces of furniture
(e.g. cupboards) and the like. To avoid risk of serious injury the distance between the top safety barrier and the adjoining structure
shall not exceed 75 mm or shall be more than 230 mm";
d) WARNING "Do not use the bunk bed/high bed if any structural part is broken or missing;
e) always follow the manufacturer's instructions;
f) This bunk bed is suitable for a single mattress or foam bed 920mm x 1870mm.Thickness of mattress should not exceed 200mm.
g) Ventilation of the room is necessary in order to keep the humidity low and to prevent mauld in and around the bed;
h) all bunk beds and high beds intended to be assembled by other than the manufacturer or his/her representative shall include
assembly instructions including a list of the parts supplied and details of any tools required to assemble the bed;
i)
Use ladder for entering and leaving upper bunk.
j)
The bunk bed should be checked periodically by the owner to ensure that the guardrail, ladder and other components are
maintained in the correct position and state of repair and that all connectors are tight.
k) This bunk bed conforms to BS EN 747-1 : 2012 + A1 : 2015
Tools Required For Assembly
Philips Screw Driver
All manuals and user guides at all-guides.com
ASSEMBLY INSTRUCTIONS
: CK 6280
920mm x 1930mm
Option A Option B
Tools Not Use
DO NOT USE POWER TOOLS
TO ASSEMBLE THIS PRODUCT.
USE OF POWER TOOLS WILL
INVALIDATE ANY CLAIM AND
MAY DAMAGE THIS PRODUCT
MAKING IT UNSAFE.
DO NOT USE HAMMER
1
20